The Great Hawk is a scaled up version of the original Hawk. It is
designed for Cruising and Racing Yachts up to 20m. The Great Hawk Vane
arm is made from the same super tough nylon and the Reference Arms are
made of glassed filled nylon for ultimate rigidity and UV Protection.
The precision balanced vane arm and Hawks “V” Jewel bearing surface
gives instant response to shifts and gusts with minimal inertia. The
Reference Arms can be preset at 55, 60 or 65 degrees or any angle you
prefer and can be used for either upwind or downwind angles. The 5mm
Aluminium support rod is strong enough to take normal wear and tear, but
can be bent straight should it be knocked while the mast is being
stepped or unstepped. The Great Hawk is easily removed from its mounting
bracket with one screw and the mast bracket can be mounted vertically or
horizontally. In addition the Great Hawk can be bolted down to any
pre-drilled 8mm holes in the mast head crane using the supplied adaptor
with nut and bolt.
Use: Cruising and Racing Yachts up to 20m.
Vane Arm Length: 38cm
Overall Height: 29cm
Overall Weight: 70gms
Bearing: “V” Jewel
UV Protected: Yes
Balanced Arm: Counter Weight.
Tel: +44 (0)23 92463864 Email: firstname.lastname@example.org
HAWK Marine Products Ltd, Olympic House
Mill Rythe Lane, Hayling Island, Hampshire, PO11 0QG
TEL: +44 (0)23 92463864 FAX: +44 (0)23 92467204 Email: email@example.com